Breathable Surface Protection Felt for Reliable Floor and Hard-Surface Protection

Temporary surface protection is an essential part of construction, renovation, interior fitting, manufacturing, transportation, and property maintenance. Floors, stairs, worktops, tiles, ceramics, sanitary ware, and other finished surfaces can be damaged easily by foot traffic, tools, dust, spilled liquids, paint, solvents, and the movement of materials. Once a surface has been scratched, stained, chipped, or marked, repair and replacement can create significant cost and delay. A suitable protection material must therefore do more than simply cover a surface. It must remain securely in place, resist water and common construction liquids, reduce the risk of slipping, protect against mechanical damage, and be easy to install and remove.

Breathable Surface Protection Felt is designed to meet these requirements through a practical multilayer structure. A non-woven synthetic fleece forms the central protective layer, while a breathable polyethylene film is laminated to the upper side. The reverse side is coated with a low-to-medium adhesion self-adhesive layer. This combination creates a durable, waterproof, breathable, non-slip, and reusable protective covering for many hard surfaces.

Unlike ordinary plastic sheets, paper coverings, or loosely laid fabric, this protective felt is engineered to remain functional in demanding working environments. It can help prevent scratches and stains while allowing limited moisture circulation through the protected surface. It can also be wiped, vacuumed, rolled, cut, and removed without leaving adhesive residue when properly selected and applied.

Manufactured by Wuxi Qida Tape Co., Ltd., the product benefits from an integrated production system covering backing film production, adhesive coating, lamination, printing, rewinding, slitting, inspection, and packaging. The company’s experience in protective film and surface protection solutions supports customized product development for different floors, materials, working conditions, and customer specifications.

What Is Breathable Surface Protection Felt?

Breathable Surface Protection Felt is a temporary protective covering made from three functional components. The middle layer is a non-woven synthetic fleece that provides thickness, softness, cushioning, and resistance to tearing. A polyethylene film is adhered to the top of this fleece to provide waterproof protection and help prevent paint, water, solvent, and other liquids from reaching the protected surface. The underside contains a pressure-sensitive adhesive that helps the material stay in position without requiring additional tape.

The product is suitable for many smooth or relatively smooth hard surfaces, including tiled floors, parquet, laminate flooring, stairs, kitchen worktops, ceramic surfaces, sanitary ware, and other finished construction materials. It is particularly useful when a surface has already been completed but surrounding construction, installation, decoration, or maintenance work is still in progress.

Its breathable design distinguishes it from fully sealed plastic film. The stated permeability is 1200 ml/m² every 24 hours. This allows moisture and air circulation under appropriate conditions and can reduce the risks associated with trapped humidity. At the same time, the polyethylene layer offers a barrier against liquid spills from above. The result is a balanced protective solution that combines surface coverage with controlled breathability.

The adhesive is intended for temporary positioning rather than permanent bonding. Its low-to-medium adhesion level allows the felt to remain stable during work while supporting removal after the job is complete. When the correct specification is used on a clean, compatible surface and removed according to recommended practice, the product is designed to leave no adhesive transfer.

Why Temporary Surface Protection Matters

Finished surfaces are often among the most expensive and visible parts of a building or product. A newly installed floor may represent a major investment in materials and labor. A countertop, ceramic wall, stair covering, or sanitary fixture may be difficult to repair once it has been scratched or stained. Damage can occur even when workers are careful because construction environments involve many uncontrolled risks.

Dust and grit can become trapped under equipment or footwear and create abrasion. Metal tools may be dropped. Ladders and scaffolding may be moved across a floor. Paint, grout, sealants, oils, cleaning agents, and solvents may be spilled. Water may be tracked into a room from outside. Heavy materials may be placed temporarily on a finished surface. Without effective protection, these routine activities can produce marks that are expensive and time-consuming to remove.

Protective felt creates a separation layer between the finished surface and the working environment. The fleece absorbs and distributes minor pressure, while the polyethylene film helps block liquid penetration. The adhesive underside helps limit movement, reducing the chance that the material will bunch up, expose the surface, or create a trip hazard. These functions work together to make the job site safer and to preserve the appearance of the completed surface.

Good protection also improves project efficiency. Workers can complete remaining tasks with greater confidence, cleaning requirements may be reduced, and the risk of rework is lowered. Property owners receive a cleaner handover, contractors can reduce claims related to accidental damage, and manufacturers or installers can protect products during storage and transportation.

Multilayer Construction and Functional Advantages

Non-Woven Synthetic Fleece Core

The non-woven synthetic fleece in the middle provides the product with its main cushioning and protective properties. Unlike a thin, unsupported plastic sheet, fleece has a textile-like structure that can absorb minor impacts and distribute localized pressure. This helps reduce the direct effect of tools, footwear, packaging, and other objects placed on the surface.

The fleece layer also gives the product flexibility. It can conform to many flat or slightly irregular areas and can be cut around corners, posts, fixtures, stairs, and other obstacles. Its textile construction supports handling during installation and allows the material to be rolled for storage and transportation.

Depending on the selected specification, fabric weights range from 100 g/m² to 250 g/m². Lighter grades may be suitable for general dust and light traffic protection, while heavier grades can provide increased durability and cushioning for demanding renovation or construction environments.

Breathable Polyethylene Film

The polyethylene film on the upper side provides an important liquid-resistant barrier. Water, paint, solvents, and similar liquids can be prevented from quickly reaching the protected surface when the material is correctly installed. The film also makes the surface easier to wipe and clean during work.

At the same time, the film is designed to support breathability. Its permeability is specified at 1200 ml/m² every 24 hours. This feature is useful where trapped moisture could create problems beneath a completely sealed covering. Breathability does not mean that the product should be treated as an unlimited waterproof membrane or used in standing water. Instead, it provides controlled circulation while maintaining practical protection against common accidental spills.

Self-Adhesive Underside

The back of the protective felt is coated with a pressure-sensitive adhesive. This eliminates the need for separate tape in many applications and helps the covering remain stable under normal site traffic. The adhesive layer is designed to provide low-to-medium adhesion, balancing secure positioning with removability.

This feature is especially valuable on stairs, walkways, work areas, and other locations where a loose sheet could shift. A covering that moves frequently may expose the surface beneath it or create folds that interfere with walking. By maintaining contact with the surface, the self-adhesive backing helps provide a flatter and more dependable protective layer.

Although the product is designed for clean removal, adhesive performance depends on the substrate, surface condition, temperature, installation duration, and exposure to sunlight or chemicals. A small compatibility test should be completed before large-scale application, especially on newly finished, delicate, porous, waxed, untreated, or chemically sensitive surfaces.

Breathable Surface Protection Felt

Main Product Features

Breathability and Moisture Circulation

The product provides a permeability rate of 1200 ml/m² every 24 hours. This controlled breathability helps air and moisture circulate through the protective system rather than becoming completely trapped beneath an impermeable sheet. Such circulation can be beneficial during renovation projects where a floor or substrate may contain residual moisture.

Breathability is also valuable when the protective covering must remain in place for an extended period. However, users should understand that permeability does not replace proper moisture testing or ventilation. If a surface is visibly wet, leaking, or exposed to continuous water, the source of the moisture should be corrected before the protective felt is installed.

Non-Slip Construction

A protective covering must not only protect the floor; it must also support safe movement. The fleece-backed structure and adhesive underside help reduce sliding and movement during construction activities. This can be important for contractors, installers, decorators, cleaners, and property occupants who need to walk across protected areas.

Non-slip performance may vary according to the substrate, footwear, surface contamination, slope, moisture level, and installation quality. The product should be laid flat, with edges properly positioned and overlapping sections secured when necessary. Any folded, damaged, or contaminated section should be corrected promptly.

Waterproof and Spill-Resistant Protection

The polyethylene film helps protect against common liquids such as water, paint, and solvents. This makes the product suitable for painting, plastering, decorating, tile installation, joinery, kitchen fitting, and general renovation. If a spill occurs, the liquid can often be wiped from the film before it reaches the surface below.

Liquid resistance is most effective when the material is installed without gaps and when seams, edges, corners, and joints are properly managed. Large or continuous spills should be removed quickly. The felt should not be used as a substitute for a containment system where large quantities of liquid are expected.

Durability and Reusability

The synthetic fleece is designed to be resistant, robust, and suitable for repeated handling. It can withstand routine foot traffic, cleaning, vacuuming, and movement around a job site. Its ability to be rolled and reused can reduce material consumption compared with disposable paper or thin plastic sheets.

Reusability depends on the type and intensity of use. After removal, the material should be inspected for tears, excessive contamination, adhesive damage, or loss of flatness. Clean and dry rolls can be stored for future projects. Reusing protective material can contribute to lower project waste and improved cost control.

Easy Installation and Disposal

The self-adhesive backing simplifies installation. The operator can measure the area, cut the required length, gradually remove the release liner, and press the felt onto the surface. Because additional tape is often unnecessary, installation can be faster than systems that require separate fastening materials.

At the end of the project, the covering can be lifted and removed. It should be pulled slowly and steadily rather than jerked upward. This approach reduces stress on the surface and helps prevent tearing. Disposal should follow local waste-management requirements, especially when the material has been contaminated by paint, solvents, or other substances.

No Adhesive Residue Transfer

A major advantage of temporary surface protection is clean removal. The adhesive system is designed to avoid transferring glue to the protected surface under suitable conditions. This reduces the need for aggressive cleaning chemicals and helps preserve the original appearance of the floor or worktop.

Residue performance is influenced by application time and environmental conditions. Extremely high temperatures, direct sunlight, heavy pressure, surface dust, chemical exposure, and long-term installation may affect removal behavior. Testing and periodic inspection are recommended for longer projects.

Comparison with Conventional Protection Materials

Protective felt offers several advantages over common alternatives. Ordinary polyethylene sheets are inexpensive and waterproof, but they may slide easily, tear under foot traffic, trap moisture, and require tape or other fasteners. Paper and cardboard are easy to obtain but absorb liquids, break down when wet, and provide limited protection against spills. Loose fabric may cushion a surface but does not provide a reliable liquid barrier and can move during use.

Corrugated boards can offer impact resistance but are often bulky and difficult to fit around stairs, fixtures, and irregular areas. They may also create uneven walking surfaces. Carpet remnants can be reused, but they are difficult to secure, may retain dust, and are not necessarily waterproof. Fully sealed films prevent liquid penetration from above but can create unwanted condensation when moisture is already present beneath the covering.

The multilayer design of breathable surface protection felt combines the most useful functions of these materials. The fleece supplies cushioning and handling strength. The polyethylene layer improves liquid resistance and cleaning. The adhesive underside helps prevent movement. The breathable structure supports moisture circulation. Together, these properties can reduce the compromises associated with single-material protection products.

Protection Material	Liquid Resistance	Moisture Circulation	Movement Control	Typical Reusability
Breathable surface protection felt	High for common spills	Controlled breathability	Good with self-adhesive backing	Reusable when clean and undamaged
Loose plastic sheet	High when intact	Low	Low without tape or weights	Limited to moderate
Paper or cardboard	Low	Moderate	Low to moderate	Usually limited
Loose fabric	Low unless specially coated	High	Low without fastening	Moderate
Fully sealed protective film	High	Very low	Varies by adhesive design	Moderate to high

The comparison is general and actual performance depends on material quality, application method, substrate condition, and job-site conditions. Nevertheless, the integrated construction of this product provides a strong balance between protection, stability, breathability, and practicality.

Available Specifications and Customization

Different projects require different combinations of strength, width, length, adhesion, appearance, and branding. The product is available with fabric weights from 100 g/m² to 250 g/m². This range allows buyers to select a lighter construction for short-term indoor protection or a heavier construction for more demanding traffic and handling conditions.

Available widths range from 300 mm to 1500 mm. Narrow rolls are convenient for stairs, worktops, edges, corridors, and small areas. Wider rolls can cover large floor sections with fewer joints, improving installation efficiency and reducing the number of seams that require attention.

Roll lengths range from 5 m to 100 m. Short rolls can be practical for retail, repair, and small renovation projects. Longer rolls reduce packaging and handling frequency on larger construction sites. Buyers can select the roll size that best matches transport arrangements, storage space, installation speed, and project area.

Adhesion levels range from low to medium. This provides flexibility for different surfaces and application durations. A lower adhesion level may be preferred for more sensitive materials or short-term use, while a stronger grade may be useful where traffic and movement are greater. Final selection should be based on substrate compatibility testing.

The polyethylene backing film can be supplied in blue, clear, white, and other colors. Color selection may support visual organization on a job site, help distinguish protection from the finished surface, or meet customer branding requirements. Printing is available in zero to three colors, allowing the material to carry logos, handling information, safety reminders, product identification, or project-specific instructions.

Application Areas

Tile and Ceramic Flooring

Tile installation and renovation projects often involve grout, adhesive, cutting dust, tools, and heavy movement. Once tiles have been installed, they may still require protection while walls, ceilings, cabinets, or fixtures are completed. Breathable surface protection felt can cover the tiled area, reduce abrasion, and help shield the surface from paint, water, and other construction substances.

Parquet and Laminate Flooring

Wood flooring and laminate flooring can be vulnerable to scratches, moisture, and impact. The soft fleece layer helps separate the finished floor from tools and construction traffic, while the upper film helps prevent common spills from reaching the surface. Breathability is particularly relevant where moisture management is important, although the floor must be dry and suitable for temporary covering before installation.

Stairs and Landings

Stairs experience concentrated traffic and can be difficult to protect with loose sheets. The roll can be cut into suitable sections for treads, risers, and landings. The adhesive underside helps reduce movement, while the fleece provides a more secure and comfortable walking surface than loose plastic film.

Kitchen Worktops

Kitchen worktops may be installed before appliances, cabinets, splashbacks, and plumbing work are complete. Protective felt can help guard against scratches, dust, water, paint, and dropped tools during the final stages of installation. Its wipeable polyethylene film is convenient when the worktop must remain accessible to installers.

Ceramics and Sanitary Ware

Basins, toilets, bathtubs, ceramic panels, and other sanitary products can be damaged during fitting and finishing work. Cut sections of protective felt can be applied to suitable areas to reduce surface marking and contamination. Care should be taken around delicate edges, glazed surfaces, and areas with unusual coatings. A compatibility test is recommended before full application.

Commercial and Residential Renovation

In occupied buildings, protective coverings help separate work zones from finished areas. The material can be used in apartments, offices, hotels, retail stores, restaurants, hospitals, schools, and public facilities. Its non-slip structure and clean appearance can help maintain safer and more professional working conditions while renovation continues around clients, staff, or residents.

Manufacturing and Transportation

The product is also suitable for temporary protection during the handling, storage, assembly, and transportation of finished panels, fixtures, and other hard surfaces. It can help reduce scratches and dirt during movement between production stages. Custom widths, roll lengths, colors, and printed markings may support factory workflow and product identification.

Installation Guidelines

Before installation, inspect the surface and remove loose dust, grit, oil, water, and other contaminants. The surface should be dry, structurally sound, and compatible with temporary adhesive application. Newly coated, waxed, porous, textured, or chemically treated surfaces require particular caution.

Measure the area before cutting the roll. Allow sufficient material to cover the intended zone without creating unnecessary folds. For large floors, plan the direction of the rolls so that seams are minimized and walking routes remain clear. For stairs and narrow worktops, cut manageable sections that can be positioned accurately.

Place the product with the polyethylene film facing upward and the adhesive side facing the surface. Begin at one end and gradually remove the release liner while pressing the felt into place. Avoid stretching the material excessively. Use a soft roller or clean hand pressure to improve contact and reduce air pockets.

Where sections meet, align the edges carefully. Depending on the project, sections may be butted together or overlapped. The selected method should avoid exposed gaps and raised edges. At corners and around fixtures, make controlled cuts rather than forcing the material into position.

Inspect the completed installation. Check that edges are flat, walking paths are clear, and the surface is not shifting. Replace or repair damaged sections. During a long project, inspect the covering regularly, especially near entrances, wet areas, high-traffic locations, and places where heavy equipment is moved.

Removal, Cleaning, and Storage

Remove the protective felt after the work area is clean enough to prevent loose dust and debris from falling onto the exposed surface. Start at a corner or edge and pull the material slowly at a low angle. If a section feels unusually difficult to remove, stop and evaluate the surface, temperature, adhesive condition, and duration of use.

The upper film can be wiped with a suitable cloth or cleaned using normal site-maintenance methods. Vacuuming can remove dry dust and debris from the fleece side. Avoid aggressive chemicals unless they have been confirmed as compatible with the product and the surface beneath it.

For reuse, allow the material to dry fully and remove loose contamination. Roll it with the protective film on the outside or according to the recommended storage method. Store rolls in a clean, dry location away from direct sunlight, excessive heat, sharp objects, and chemical vapors. Correct storage helps preserve adhesive performance and material flatness.

Do not reuse material that has been torn, heavily contaminated, saturated with chemicals, or otherwise weakened. Contaminated material should be handled and disposed of in accordance with applicable local regulations.

Quality and Safety Considerations

Temporary protection products should be evaluated not only by appearance but also by measurable performance. Important considerations include fabric weight, tensile strength, tear resistance, film integrity, permeability, adhesive uniformity, peel behavior, slip characteristics, roll quality, and print clarity.

Quality control should confirm that the non-woven fleece is evenly formed, the polyethylene film is securely laminated, and the adhesive coating is consistent across the usable width. Uneven adhesive distribution may cause poor positioning, premature lifting, or excessive adhesion in isolated areas. Slitting and rewinding accuracy are also important because irregular edges can complicate installation.

Users should keep the work area ventilated when paints, solvents, and other volatile substances are being used. The protective felt should not be placed near open flames or exposed to conditions beyond its intended application range. It should not be used to cover live electrical equipment, block emergency exits, or create a barrier that prevents access to safety equipment.

A small test area is recommended before applying the product over a large or valuable surface. Leave the test section for a period representative of the expected application and then remove it carefully. Inspect for staining, surface dulling, adhesive transfer, coating disturbance, or other changes.

Advanced Manufacturing Capabilities

Wuxi Qida Tape Co., Ltd. operates as a manufacturer of protective films and surface protection products rather than simply a trading company. Its production system includes backing film manufacturing, adhesive coating, lamination, logo printing, rewinding, slitting, inspection, and packaging. Controlling these stages within one factory supports consistency, traceability, and flexible response to customer requirements.

The company has introduced advanced machinery from Germany and operates under ISO 9001 and ISO 14001 management systems. ISO 9001 supports structured quality-management practices, while ISO 14001 supports environmental-management procedures. These systems help establish repeatable processes for raw-material control, production monitoring, inspection, corrective action, and continual improvement.

Qida Tape has experienced technicians and engineers who work with research and development institutes to develop new protective film and surface protection products. This technical foundation is useful when a customer needs a special adhesion level, a particular film color, a printed design, a different roll format, or a product adapted to an unusual surface.

The company’s own testing laboratory and inspection equipment support evaluation of raw materials, adhesive performance, film quality, product dimensions, and finished-roll consistency. Testing helps identify process variation before products are shipped and provides customers with greater confidence in repeat orders.

Integrated manufacturing also improves production efficiency. Backing film production can be coordinated with coating and lamination schedules. Rewinding and slitting can be adjusted to customer widths. Packaging can be prepared according to export requirements, private-label needs, or project specifications. This level of control can reduce unnecessary handling and improve delivery reliability.

Company Strengths and Customer Support

Founded in 1999, Wuxi Qida Tape Co., Ltd. has developed long-term experience in protective films and surface protection solutions. The company has a factory area of approximately 20,000 square meters, more than 95 experienced employees, and an annual production capacity exceeding 12,000 tons.

Its products are supplied throughout China and exported to Europe, North America, Australia, the Middle East, Japan, and other regions. The company serves customers in approximately 90 export areas, giving its production and service teams experience with different market expectations, packaging requirements, and application conditions.

Qida Tape offers acrylic water-based adhesive, acrylic solvent-based adhesive, and natural rubber adhesive options. This range allows engineers to match adhesive technology with the intended substrate, temperature, application period, and removal requirements. For breathable surface protection felt, the appropriate low-to-medium adhesion grade can be selected according to the target application.

The company supports customization based on customer technical data sheets or physical samples. Customers can discuss fabric weight, width, roll length, film color, printing, adhesion, packaging, and other requirements with professional engineers and technicians. This is especially beneficial for distributors, construction-supply companies, manufacturers, and large contractors that need a product with consistent private-label specifications.

Product and management compliance includes ISO 9001, ISO 14001, SGS, RoHS, REACH, PFAS, and Prop 65 testing or related compliance support. Customers should confirm the exact document and test scope required for their market and application. These certifications and testing capabilities demonstrate the company’s attention to quality, environmental responsibility, and regulatory expectations.

Environmental and Economic Benefits

Environmental performance is increasingly important when selecting temporary construction materials. Breathable surface protection felt can contribute to more responsible material use through its durability and potential reusability. A robust protective covering may be used on multiple projects or in several phases of one project, reducing the need for disposable paper, cardboard, or thin plastic alternatives.

The company’s ISO 14001 environmental-management system supports the development of controlled production and resource-management practices. The use of an integrated factory can also improve process efficiency by reducing unnecessary transport between separate production facilities.

Economic value should be considered beyond the purchase price per roll. A lower-cost covering that tears, shifts, absorbs spills, or leaves residue may lead to cleaning labor, replacement materials, surface repairs, delays, or disputes. A more reliable protective product can reduce these indirect costs by preserving finished surfaces and supporting a smoother workflow.

Custom roll sizes can also reduce waste. When the width and length match the application, installers may spend less time cutting and produce fewer unused offcuts. Printed instructions or project markings can improve handling and reduce installation errors, particularly on large commercial sites.

How to Select the Correct Specification

Begin by identifying the surface to be protected. Tile, parquet, laminate, ceramic, stone, painted panels, and coated worktops may have different levels of sensitivity to pressure-sensitive adhesive. Review the manufacturer’s recommendations for the underlying surface and perform a test before full application.

Next, assess the expected traffic and mechanical exposure. Light foot traffic and short installation periods may require a lower fabric weight. Heavy traffic, repeated movement of materials, and longer projects may justify a heavier 200 g/m² or 250 g/m² grade.

Consider whether breathability is important. If the surface is fully dry and the main requirement is short-term spill protection, several product options may be suitable. If moisture circulation is a priority, the breathable protective felt offers an advantage over fully sealed film.

Choose the width according to the layout. Narrow rolls are easier to handle in tight spaces, while wider rolls reduce seams on open floors. Determine the roll length based on storage capacity, installation labor, and the total area to be covered.

Finally, select the adhesive level and color. Low adhesion may be appropriate for delicate surfaces or short applications. Medium adhesion may be more suitable for high traffic or areas where movement is a concern. Film color and printing can be selected for visibility, organization, branding, or customer instructions.

Selection Factor	Recommended Consideration
Surface type	Confirm compatibility and test adhesive removal
Project duration	Match adhesion and durability to the application period
Traffic level	Select fabric weight according to foot traffic and handling
Liquid exposure	Use the polyethylene film for protection from common spills
Moisture conditions	Use breathable construction where controlled circulation is needed
Area size	Choose roll width and length to reduce seams and waste
Branding requirements	Specify film color and up to three-color printing if required

Frequently Asked Questions

What surfaces can be protected with this product?

It is designed for many hard surfaces, including tiled floors, parquet, laminate flooring, stairs, kitchen worktops, ceramics, sanitary ware, and similar finished surfaces. Compatibility should always be tested before large-scale use, particularly on delicate, porous, waxed, freshly coated, or chemically treated materials.

Is the product completely waterproof?

The polyethylene film provides strong resistance to common spills such as water, paint, and solvents. It is intended as temporary surface protection, not as a permanent waterproofing membrane or a solution for standing water and continuous leakage. Spills should be removed promptly, and seams and edges should be installed carefully.

What does breathable protection mean?

Breathable protection means the product allows controlled air and moisture circulation. The specified permeability is 1200 ml/m² every 24 hours. This can reduce the risks associated with trapping moisture beneath a fully sealed covering, but it does not eliminate the need for a dry, suitable substrate and proper ventilation.

Does the product require additional tape?

In many applications, no additional tape is needed because the underside has a self-adhesive coating. Additional fastening may be considered for unusual layouts, heavy contamination, exposed edges, or high-risk conditions, but any additional adhesive should also be tested for surface compatibility.

Will the adhesive leave residue?

The adhesive is designed to provide clean removal without glue transfer under suitable conditions. Actual performance depends on the surface, temperature, application period, pressure, sunlight, chemical exposure, and substrate coating. A test patch is recommended before installation over a valuable or sensitive surface.

Can the protective felt be reused?

Yes, it is resistant and reusable when it remains clean, dry, intact, and functional. After removal, inspect the material for tears, contamination, adhesive damage, and loss of flatness. Do not reuse material that has been heavily contaminated or damaged.

What roll sizes are available?

Widths are available from 300 mm to 1500 mm, and roll lengths range from 5 m to 100 m. Fabric weights range from 100 g/m² to 250 g/m². Customized combinations may be discussed according to project requirements.

What colors and printing options are available?

The polyethylene film can be supplied in blue, clear, white, and other colors. Printing is available in zero to three colors. Printed content may include company identification, product information, handling instructions, safety reminders, or project markings.

How should the product be installed on stairs?

Measure and cut sections for the treads, risers, and landings. Clean and dry the surface, then remove the release liner gradually while pressing the felt into place. Ensure that edges are flat and do not create raised trip points. Check the installation regularly because stairs receive concentrated traffic.

Can the product protect against solvents?

The polyethylene film is designed to resist common liquids including solvents, but the exact chemical resistance depends on the specific substance, concentration, temperature, and contact duration. Remove chemical spills promptly and consult technical information before using the product in an environment with aggressive chemicals.

How does this product compare with loose plastic film?

Loose plastic film may provide liquid resistance but often shifts, tears, traps moisture, and requires tape or weights. Breathable surface protection felt adds a fleece cushioning layer, controlled breathability, and a self-adhesive underside, creating a more stable and versatile temporary protection system.

Can the manufacturer provide customized products?

Yes. Customers can request different fabric weights, widths, roll lengths, adhesion levels, film colors, printing designs, and packaging formats. Qida Tape’s engineers can work from technical data sheets or physical samples to develop a suitable specification.

Conclusion

Breathable Surface Protection Felt provides a balanced solution for protecting finished floors, stairs, worktops, ceramics, sanitary ware, and other hard surfaces during construction, renovation, installation, transportation, and maintenance. Its non-woven synthetic fleece core provides cushioning and durability, the polyethylene film helps resist water, paint, and solvents, and the self-adhesive underside helps keep the covering stable without requiring separate tape.

Its controlled permeability of 1200 ml/m² every 24 hours offers an important advantage over fully sealed coverings where moisture circulation matters. Non-slip performance, wipeability, vacuum compatibility, reusability, and clean removal further improve its suitability for professional work environments.

The available range of fabric weights, widths, roll lengths, adhesion levels, colors, and printing options allows the product to be adapted to different applications. Through integrated manufacturing, advanced equipment, technical engineering, laboratory testing, and quality-management systems, Wuxi Qida Tape Co., Ltd. can support both standard orders and customized protective-felt solutions.

For buyers seeking a temporary protective material that combines mechanical protection, liquid resistance, controlled breathability, installation efficiency, and professional manufacturing support, this product offers a practical alternative to loose plastic, paper, cardboard, and uncoated fabric coverings.

References

1. Product specification information for Breathable Surface Protection Felt, including permeability, fabric weights, dimensions, adhesive levels, film colors, and printing options.

2. General principles of temporary surface protection for construction, renovation, flooring installation, and interior finishing applications.

3. ISO 9001 quality-management system principles for manufacturing consistency, process control, inspection, and continual improvement.

4. ISO 14001 environmental-management system principles for resource management, environmental control, and continual improvement.

5. General technical guidance on pressure-sensitive adhesive selection, substrate compatibility testing, temporary application, and clean removal.

6. General material guidance for polyethylene films, non-woven synthetic fabrics, breathable protective membranes, and reusable construction coverings.

Product: Breathable Surface Protection Felt